Cisco UCS Administration Guide

3-11
Cisco UCS Invicta Scaling System Administration and Configuration Guide, Version 5.0.1.1a
Chapter 3 SSR Configuration
Error Correction
The Error Correction window provides an ability to turn Error Correction On or Off. The default is Off.
If Error Correction is On and a data block becomes corrupted or inaccessible, Error Correction will
reconstruct the data block content using parity. Some usage guidelines are:
• Where maximum data protection is needed, Error Correction is usually turned On.
• Where maximum performance is needed, Error Correction is usually turned Off as it has an impact
on reading performance of up to 15%.
To access the Error Correction switch, choose SSR Configuration > Error Correction.
Support Settings
The Cisco Installation Team will have configured Cisco UCS Invicta Scaling System so that there is SRR
communication and SSR-to-SSN communication. The SSRs are connected to the network and are now
controlling the network data sent to the SSNs. Network Configuration settings have been entered in the
Support Settings window.
These settings include:
• Host Name
• SMTP Server
• SMTP User
• Autosupport CC
• Send from Domain
• Proxy URL/IP
• Proxy Port
• NTP Server
• Time Zone
Support Setting Configuration
To verify or modify support settings, do the following:
Step 1 Choose SSR Configuration > Support Settings.
The Support Settings window appears.
Step 2 Complete or modify field information as necessary. See Table 3-4, for a description of the Support
Settings fields.

Cisco UCS Specifications

General

Brand	Cisco
Model	UCS
Category	Server
Language	English