Cisco WAP4410N - Small Business Wireless-N Access Point User Manual

Configuring the WAP4410N Wireless-N Access Point
Administration
WAP4410N Wireless-N Access Point with Power Over Internet 60
6
To reboot the access point, follow these steps:
STEP 1 Click Administration > Reboot.
STEP 2 In the Device Reboot field, click Yes.
STEP 3 Click Save.
Managing the Access Point’s Configuration
The Administration > Config Management page allows you to create a backup
configuration file or upload a configuration file to the access point.

Cisco WAP4410N - Small Business Wireless-N Access Point Specifications

General

Frequency Band	2.4 GHz
Ethernet Port	1 x 10/100 Mbps
Power Over Ethernet (PoE)	Yes
Max Data Rate	300 Mbps
Security Features	WPA2, WPA, WEP
Operating Modes	Access Point
Operating Temperature	0°C to 40°C (32°F to 104°F)
Weight	0.3 kg (0.66 lbs)
Wireless Standard	802.11n