A-20
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
78-6511-08
Appendix A System Messages
Error Message and Recovery Procedures
LRE CPE Messages
This section contains the Long-Reach Ethernet (LRE) customer premises equipment (CPE) initialization
error messages.
Error Message LRE_CPE-3-NOVERCKSUM: Could not fetch CPE firmware version and
checksum on interface [chars].
Explanation
Could not retrieve the CPE firmware version and checksum.
Recommended Action Verify that the CPE has a microcontroller. Make sure that the CPE has the latest
firmware. Make sure that there is an LRE link.
Error Message LRE_CPE-3-UNKNOWNMODEL: CPE has unrecognizable model number [chars] on
interface [chars]
Explanation The model number string in the CPE EEPROM does not match a known CPE model
number.
Recommended Action If this is a Cisco supported CPE, the model number string in the CPE EEPROM
must be reprogrammed.
Error Message LRE_CPE-3-WRONGAPPVER: CPE on interface [chars] reported unsupported
version of application firmware [chars]. Minimum application firmware version
needed [chars]
Explanation
Each CPE requires a currently supported application firmware version for it to function
correctly. This CPE has a application firmware version that predates the earliest supported version.
Recommended Action Upgrade the application firmware on the CPE to a version that supports the
current requirements.
Error Message LRE_CPE-3-WRONGBOOTVER: CPE on interface [chars] reported unsupported
version of bootloader firmware [chars]. Minimum bootloader firmware version needed
[chars]
Explanation
Each CPE requires a currently supported bootloader firmware version for it to function
correctly. This CPE has a bootloader firmware version that predates the earliest supported version.
Recommended Action Upgrade the bootloader firmware on the CPE to a version that supports the
current requirements.
Error Message LRE_CPE-3-WRONGPATCH: CPE on interface [chars] has wrong patch version
[hex]. Patch version [hex] or higher is needed for this CPE.
Explanation
Each CPE requires a currently supported patch version for it to function. This CPE has
a patch version that predates the earliest supported version.
Recommended Action Upgrade the patch on the CPE to a recent version that supports the current
requirements.
To Next Page
Loading...
Need help?
General