A-46
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
78-6511-08
Appendix A System Messages
Error Message and Recovery Procedures
Error Message TTYDRIVER-2-NOBUFPOOL_ASYNC: Unable to create buffer pool for async.
mode interface
Explanation
There is not enough memory for a per-channel control block of the async TTY driver.
Recommended Action Reduce other system activity to ease memory demands. If conditions warrant,
upgrade to a larger memory configuration.
Error Message TTYDRIVER-2-NOMEM: Unable to allocate [dec] byte status block
Explanation
The async TTY driver was unable to create an internal structure due to a low-memory
condition.
Recommended Action Reduce other system activity to ease memory demands. If conditions warrant,
upgrade to a larger memory configuration.
VQPCLIENT Messages
This section contains the Dynamic VLAN VQP client error messages.
Error Message VQPCLIENT-2-CHUNKFAIL: Could not allocate memory for VQP
Explanation
No explanation is available at this time.
Recommended Action Copy the error message exactly as it appears on the console or in the system log.
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.
Error Message VQPCLIENT-7-DELETING: Freeing deleted saved responses
Explanation No explanation is available at this time.
Recommended Action No action is required.
Error Message VQPCLIENT-2-DENY: Host [enet] denied on interface [chars]
Explanation
No explanation is available at this time.
Recommended Action Copy the error message exactly as it appears on the console or in the system log.
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.
To Next Page
Loading...
Need help?
General