Cisco WS-C2950T-24 User Manual

A-28
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
78-6511-08
Appendix A System Messages
Error Message and Recovery Procedures
PMSM Messages
This section contains the Port Manager state machine error messages.
Error Message PMSM-4-BADEVENT: Event ’[chars]’ is invalid for the current state
’[chars]’:[chars] [chars]
Explanation
The Port Manager subsystem attempted to post an event to a state machine that is invalid
for the current state.
Recommended Action No action is required.
Error Message PMSM-4-INIT: Internal error while initializing state machine
’[chars]’, state ’[chars]’: [chars]
Explanation An invalid request was detected by the Port Manager.
Recommended Action No action is required.
Error Message PMSM-4-NOTIDLE: Attempted to stop state machine [chars] [chars] but it
is not idle
Explanation
The Port Manager subsystem attempted to stop a state machine that has events pending.
Recommended Action No action is required.
Error Message PMSM-4-STOPPED: Event ’[chars]’ ignored because the state machine is
stopped: [chars] [chars]
Explanation
The Port Manager subsystem attempted to post an event to a state machine that has
already been stopped.
Recommended Action No action is required.
Error Message PMSM-4-TOOMANY: Event ’[chars]’ ignored because there are too many
pending events:[chars] [chars]
Explanation The Port Manager subsystem attempted to post an event to a state machine that already
has the maximum number of events pending.
Recommended Action No action is required.
Error Message PMSM-4-UNKNOWN: Event ([dec]) is unknown for the state machine:[chars]
[chars]
Explanation
The Port Manager subsystem attempted to post an unknown event to a state machine.
Recommended Action No action is required.

Cisco WS-C2950T-24 Specifications

General

Brand	Cisco
Model	WS-C2950T-24
Category	Switch
Language	English