267
7
Practical information
C4-Picasso-II_en_Chap07_info-pratiques_ed01-2014
Removing a wheel
Parking the vehicle
Immobilisethevehiclewhereitdoesnot
blocktraffic:thegroundmustbelevel,
stableandnotslippery.
Applytheparkingbrakeunlessithas
beenprogrammedtoautomaticmode,
switchofftheignitionandengagefirst
gear*toblockthewheels.
Checkthatthebrakingwarninglamp
andthePwarninglampintheparking
brakecontrollevercomeon.
Forgreatersafety,placeachock2
againstthewheeloppositetotheone
beingchanged.
Theoccupantsmustgetoutofthe
vehicleandwaitwheretheyaresafe.
Nevergounderneathavehicleraised
usingajack;useanaxlestand.
List of operations
F Removethefinisherfromfromeach
ofboltsusingthetool4(dependingon
equipment).
F Fitthesecuritysocket5 on the
wheelbrace 1toslackenthesecuritybolt(if
fitted).
F Slackentheotherbolts(nomorethana
1/4turn)usingthewheelbrace1only.
* Position RforanelectronicgearboxorP for
anautomaticgearbox.
Donotuse:
- thejackforanythingotherthan
liftingthevehicle,
- anyotherjackthantheone
suppliedbythemanufacturer.
To Next Page
Loading...
Need help?
General
