08
403
C4-Picasso-II_en_Chap10b_SMEGplus_ed01-2014
Dependingonyourtelephone,youmaybeaskedtoaccept
automaticconnectioneverytimetheignitionisswitchedon.
Dependingonthetypeoftelephone,thesystem
willaskyoutoacceptornotthetransferofyour
contacts.
Theservicesavailabledependonthenetwork,theSIMcardandthe
compatibilityoftheBluetoothtelephoneused.Checkthetelephone
manualandwithyournetworkproviderfordetailsoftheservices
availabletoyou.
Onreturntothevehicle,thelasttelephoneconnectedautomatically
reconnects,withinaround30secondsafterswitchingontheignition
(Bluetoothactivated).
Tomodifytheautomaticconnectionmode,selectthetelephonein
thelistthenselectthedesiredprole.
Thetelephoneisaddedtothelist.
BLUETOOTH
If not, select "Update".
Theabilityofthesystemtoconnectwithonlyoneproledependson
thetelephone.Thetwoprolesmaybothconnectbydefault.
Visitwww.citroen.co.ukformoreinformation(compatibility,
additionalhelp,...).
Automatic reconnection
Connecting a Bluetooth peripheral
Onswitchingontheignition,thetelephoneconnectedwhenthe
ignitionwaslastswitchedoffisautomaticallyreconnected,ifthis
connectionmodehadbeenactivatedduringthepairingprocedure.
Theconnectionisconrmedbythedisplayofa
messageandthenameofthetelephone.
Press on Telephonetodisplaytheprimary
pagethengotothesecondarypage.
Manual connection
Select "Bluetooth"todisplaythelistofpaired
peripherals.
Selecttheperipheraltoconnect.
Press on "Search".
Theconnectionisconrmedbythedisplayofa
messageandthenameofthetelephone.
To Next Page
Loading...
Need help?
General
