Clarion CMV1 User Manual

30
CMV1
English
Owner’s manual
Receiving stations selected by
category
Satellite Radio allows you to select broadcast
channel category (contents).
1. Press and hold the [SAT] button (1 sec.) to
select the category selection mode.
∗ It press once again, return to the channel
selection mode.
2. Turn the [UP/DOWN] knob to change the
category item.
3. Press the [ X ] or [ V ] button to tune in a station.
Notes:
• When the category selection mode is entered, the
category of the last received channel is displayed
first.
• The category selection mode is canceled when no
channel with the selected category can be found.
• If no operation is performed within 7 seconds, the
category selection mode is canceled, and
resumes to the channel mode.
Scan function
There are two scan modes: the category scan
mode and the preset scan mode.
During scanning channels are displayed in
abbreviated form, the display mode cannot be
switched.
∗ This function is available in the channel selection
mode.
● Preset scan
A preset scan scans the channels (up to 18
channels) stored in the preset memory about
every 10 seconds.
1. Press the [OPTION] button.
2. Turn the [UP/DOWN] knob to select “Preset
Scan”.
3. Press the [ENTER] button.
And start the preset scanning.
● Category scan
In a category scan, broadcast channels in the
same category as the current channel are
selected about every 10 seconds.
1. Press the [OPTION] button.
2. Turn the [UP/DOWN] knob to select
“Category Scan”.
3. Press the [ENTER] button.
And start the category scanning.
Note:
• Category scanning is not available when no
category is defined for the current channel.
iPod Operations
iPods can be connected by using the connector cable supplied with the iPod, bu t in this case, you can
enjoy its audio sound only. To enjoy video movies stored in the iPod with video displaying them on this
unit, it is required to use the special connector cable (CCA-723) separately sold.
Note:
• This system will not operate or may operate improperly with unsupported versions.
• For detailed information on the playable iPod models, see our home page: www.clarion.com
Notes on using Apple iPod
• Do not connect an iPod to this unit with a
headphone connected to the iPod.
• When in the iPod mode, a special iPod control
screen is displayed different from the main
screens for other modes.
• Set the iPod’s language setting to English
before connecting your iPod. Some characters
of the other languages may not be displayed
correctly in this system.
● Precautions on battery consumption:
If the iPod is connected to this unit when the
iPod’s internal ba
ttery has run down, this function
may not operate correctly. You must connect the
iPod after charging the battery if it has run down.
Selecting the iPod mode
1. Connect your iPod to the USB connector.
The system will automatically detect the
connected device, and change to the USB
mode (iPod mode), and start playback after a
while.
See also “Connecting/Disconnecting an USB
Media Device” (page 12).
● When an iPod is already connected
1. Press the [AUX/iPod] button to select the
iPod mode.
The system changes to the USB mode (iPod
mode), and starts playback from the previous
position.
XM Satellite Radio Operations
280PE3161BA_EN.book Page 30 Thursday, March 12, 2009 1:12 PM

Clarion CMV1 Specifications

General

Brand	Clarion
Model	CMV1
Category	Marine Equipment
Language	English