34
CMV1
English
Owner’s manual
* Pausing playback
* Skiping a track
* Fast-forward and fast-backward
* Skiping the current folder
* Selecting a folder/track from the list screen
* Track Repeat
* Folder Repeat
* 1 Folder Random
* All Track Random
Note:
• When performing the fast forward or fast backward
function, the playback speed will become 10-time
faster. For the VBR files, it may differ depending on
the file.
Other various play functions
1. Press the [OPTION] button.
2. Turn the [UP/DOWN] knob to select the
function you want to play.
3.Press the [ENTER] button.
Track Scan:
•This operation allows you to locate and play
the first 10 seconds of all the tracks stored
in the USB memory.
Folder Scan:
•This operation allows you to locate and play
the first 10 seconds of the first tra
ck of all
the folders stored in the USB memory.
4. To cancel the play, perform the same
operation.
AUX Operations
This function is available when a VTR, etc. is connected to the AUX terminal.
Selecting the AUX mode
1. Press the [AUX/iPod] button to select AUX1
or AUX2.
Changing the audio input level
The input audio level of the AUX terminals can be
changed.
• The factory default setting is “Mid”.
1. Press the [OPTION] button.
2. Turn the [UP/DOWN] knob to select “AUX
Sense”.
3.Press the [ENTER] button.
4. Turn the [UP/DOWN] knob to select “Low”,
“Mid” or “High”.
5. Press the [ENTER] button.
CD Changer Operations
CD changer functions
When an optional CD changer (additional
DCZ625 CeNET changer required) is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers.
Press the [DISC] button to select the CD changer
mode to start play. If 2 CD changers are
connected, press the [DISC] button to select the
CD changer for play.
* If “No Magazine” appea rs on the display, insert
the magazine into the CD changer. “Disc Check”
appears on the display while the player loads
(checks) the magazine.
* If “No Disc” appears on the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
CAUTION
Depending on the recording format, CD-ROM
discs may not play properly.
Pausing play
1. Press and hold the [ ] button (1 sec.) to
pause play.
2. To resume CD play, press and hold the [ ]
button (1 sec.) again.
Selecting a track
● Track-up
1. Press the [V] button to move ahead to the
beginning of the next track.
2. Each time you press the [V] button, the track
advances ahead to the beginning of the next
track.
USB Memory Operations
280PE3161BA_EN.book Page 34 Thursday, March 12, 2009 1:12 PM