Clarion NX602 Owner's Manual & Installation Manual

English
28
NX602
Select tuner as playing source
Long press [ ALL ] button to enter main
source menu, then select [Tuner] to enter
Tuner mode.
If Tuner is not on the current source menu,
touch [Front] on the bottom of the screen,
then hold the center of screen and drag left/
right to show more icons.
Playback menu
Touch the bottom half of screen to show
operation bar.
1. Band switch
2. Information area
3. Preset station number
4. Current station frequency
5. Show preset stations list.
6. Scan preset stations.
7. Manual tune backward.
Auto tune backward. (long press)
8. Frequency bar
9. Manual tune forward.
Auto tune forward. (long press)
10. Show other options
Touchthebottomhalfofscreentoshow
operationbar.
Select one radio band
Touch the top left corner of the screen to
select one radio band among FM1, FM2,
FM3 and AM.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Touch the [ ] or [ ] button on the
operation bar to tune in a higher / lower
station.
Auto tuning
Hold the [ ] or [ ] button on the
operation bar for more than 2 seconds to
seek a higher / lower station.
To stop searching, repeat the operation
above or press other buttons having radio
functions.
Note:
When a station is received, searching stops
and the station is played.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station
in memory.
1. Touch the [
] button on the operation
bar.
2. When a desired station is tuned in, press
the [ ] button to continue receiving that
station.
Auto store
Only stations with sufcient signal strength
will be detected and stored in the memory.
To star automatic station search, touch
following buttons on the operation bar in
sequence: [ ] -> [ ] -> [Auto Store] ->
[OK] .
To stop auto store, press other buttons
having radio functions.
Notes:
1. After auto store, the previous stored
stations will be overwritten.
2. The unit has 4 bands, such as FM1, FM2,
FM3 and AM. FM3 and AM can store
by AS function. Each bands can store 6
stations, NX602 can store 24 stations in
total.
Manual store
When one expected radio station has been
detected, touch [
] button on the right edge
of the screen to show the preset station list,
hold one of the six preset stations for more
than 2 seconds to store it in the memory.
10. RADIO OPERATION

Clarion NX602 Specifications

General

Brand	Clarion
Model	NX602
Category	Car Video System
Language	English