37
English
NX602
Access navigation mode
1. Push the cover of the card slot located on
the bottom left of the panel to the right.
Insert a map card into the mini card slot.
2. To remove the card, you should rst select
another source or turn off the power, in
order to avoid damaging the card. Press to
pop it out, then take off the card. Close the
cover to the left.
3. Press [ ] button on panel to visit
Navigation mode.
Control buttons
1. Touch top left cornerof the screen to show
GPS informations. Touch [Back] to return.
2. Touch bottom left corner of the screen to
enter Navigation menu. Touch [Show Map]
to return.
3. Touch top right corner of the screen
to show shortcuts of general functions.
Touch [ ] button to hide.
4. Touch bottom right corner of the screen
to show Distance/Time Left/Arrival Time.
Touch it again to hide.
5. Touch the blank area to show control
buttons.
Top left corner: Plane/three-dimensional
Top right corner: Cursor location.
[ ]/[ ]: Move left/right
[ ]/[ ]: Move up/down
[ ]/[ ]: Enlarge/reduce the map
[Back]: Hide the buttons.
[More]: Show more informations.
[Select]: Select the route.
Long press [ ALL ] button to enter main
source menu, then select [AUX-1] to visit
front auxiliary device, and touch [AUX-2] to
enter rear auxiliary device.
If [AUX] is not on the current source menu,
touch [Front] on the bottom of the screen,
then hold the center of screen and drag left/
right to show more icons.
AUX is just for audio content with 3.5mm
Jack connector plugged into audio-in socket
on the front panel.
15. NAVIGATION OPERATIONS
16. AUX OPERATIONS
To Next Page
Loading...
Need help?
General
