Communication Guide, ©ComAp – March 2014 50
IGS-NT Communication Guide 03-2014.pdf
Equipment
Analog, ISDN or GSM modem
Analog, ISDN or GSM modem
Hint:
For appropriate function is the same type of modem on both sides needed. Use of combination of
analog and GSM modem is not recommended.
Modem connection to Multiple gen-sets
Hint:
I-LB+ module enables monitoring and configuration up to 32 controllers interconnected via CAN(2)
intercontroller bus. It is also possible to use I-LB+ for single controller connection.
Controllers
Controller setup
(Setpoints/Comms settings group)
CANAddrSwitch 1/CANAddrSwitch 2 = MODEM
To Next Page
Loading...
Need help?
General
