ComAp IS-NTC-BB Reference Guide

IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
223
Table of values
Group: Engine values
Value: RPM
Group
Engine values
Units
1/min
Related FW
3.0
Description
Current engine speed. See the chapter Engine speed measurement for details
about speed measurement methods.
Value: T Cyl aver
Group
Engine values
Units
°C
Related FW
3.0
Description
The value contains average cylinder temperature, i.e. average of all configured
logical analog inputs Cyl temp 1 ... Cyl temp 32
NOTE:
Available in IS-NT only.
Value: T Cyl max
Group
Engine values
Units
°C
Related FW
3.0
Description
The value contains the maximum of all cylinder temperatures, i.e. maximum of all
configured logical analog inputs Cyl temp 1 ... Cyl temp 32
NOTE:
The value is intended for creating the "high cylinder temperature" alarm using an
universal analog protection. There is a special wizard at the I/O tab in GenConfig
which makes the configuration of cylinder temperatures easy.
NOTE:
Available in IS-NT only.
Value: T Cyl min
Group
Engine values
Units
°C
Related FW
3.0
Description
The value contains the minimus of all cylinder temperatures, i.e. maximum of all
configured logical analog inputs Cyl temp 1 ... Cyl temp 32
NOTE:
The value is intended for creating the "misfiring cylinder" alarm using an universal

ComAp IS-NTC-BB Specifications

General

Brand	ComAp
Model	IS-NTC-BB
Category	Controller
Language	English