3–10 Hardware Guide
Keyboard and Pointing Devices
Disabling the Numeric Keypad
To disable the keypad and return the keys to their standard
keyboard functions, press
Fn+Num Lk.
Converting the Numeric Keypad Keys to
Standard Keys
To use the keypad keys temporarily as standard keys while the
keypad is enabled:
■ Press and hold Fn to type in lowercase.
■ Press and hold Fn+shift to type in uppercase.
When the
Fn key is released, the keypad function returns.
Enabling the Numeric Keypad at Startup
To set the computer to start up with the keypad enabled:
1. Turn on or restart the computer, then press
F10 when the
F10 = ROM Based Setup message is displayed in the
lower-left corner of the screen.
2. To change the language, press
F2.
3. For navigation instructions, press F1.
4. Select Advanced > Device Options and press enter.
5. Toggle on the Num Lock State at Boot field, then press F10.
6. To save your selections, select File > Save Changes and Exit,
then press
enter.
7. When prompted to confirm your action, press F10.
To disable the embedded numeric keypad at startup, repeat the
above procedure, toggling off the Num Lock State at Boot field.
To Next Page
Loading...
Need help?
General