5–12 Hardware Guide
Drives
4. Toggle the Boot Order fields to the boot sequence you prefer.
5. To save your preferences and exit Boot Options, press
F10.
6. To close Computer Setup and restart the computer, select
File > Save Changes and Exit, then press
F10.
Setting the MultiBoot Express Prompt
To set the computer to display the MultiBoot startup location
menu each time it is started or restarted:
1. Restart the computer, then press
F10 while the F10 = ROM
Based Setup message is displayed in the lower-left corner of
the screen.
❏ To change the language, press F2.
❏
For navigation instructions, press F1.
2. Select Advanced > Boot Options, then press enter.
3. In the Express Boot Popup Delay (Sec) field, select the
amount of time in seconds that you want the computer to
display the startup location menu before it defaults to the
current MultiBoot setting. (When zero is selected, the
Express Boot startup location menu does not display.)
4. To save your preferences and exit Boot Options, press
F10.
5. To close Computer Setup and restart the computer, select
File > Save Changes and Exit, then press
F10.
Responding to the Express Boot Menu
When the Express Boot Menu displays during startup, perform
one of the following steps during the time interval you set when
you enabled MultiBoot Express:
■ To specify a startup location from the Express Boot menu,
select your preference, then press
enter.
To Next Page
Loading...
Need help?
General