Computer Upgrades and Add-ons
Hardware Guide 8–17
For additional instructions, refer to the Help contents within
CardWare.
Inserting a PC Card
Ä
CAUTION: To prevent damage to the connectors, use minimal
pressure as you insert a PC Card into a PC Card slot.
1. Hold the PC Card label side up with the connector facing the
computer.
2. Gently push the card into the slot until the card is seated.
3. In Windows NT 4.0 with CardWare provided by Compaq,
restart the computer if you are instructed to do so by the PC
Card documentation or an on-screen prompt.
■ If you are inserting a LAN, SCSI, or multifunction PC Card,
you must restart the computer.
■ If you are inserting a modem, ATA, flash, or SRAM PC Card,
it is usually not necessary to restart the computer.
To Next Page
Loading...
Need help?
General