D-Link DAP-1160 User Manual

14D-Link DAP-1160 User Manual
Section 2 - Conguration
The Wireless Network Name is a unique
name that identies a network. All devices
on a network must share the same wireless
network name in order to communicate on the
network. If you decide to change the wireless
network name from the default setting, enter
your new wireless network name in this
eld.
This button is unavailable in Bridge mode.
This option is unavailable in Bridge mode.
Bridge
This option is unavailable in Bridge mode.
Wireless
Network Name
(also called the
SSID):
Site Survey:
Wireless
Channel:
Enable Auto
Channel scan:
Enable Hidden
Wireless:
All devices on the network must share the
same channel.
Remote AP MAC:
Enter the MAC addresses of the APs in your network that will serve as bridges to wirelessly connect multiple networks.
Note: Bridge Mode is not completely specied in WiFi or IEEE standards. It can work with other DAP-1160 units. Communication with other APs (even other D-Link
APs) is not guaranteed.
Bridge wireless mode connects 2 LANs together.
Bridge Security:
Select None to disable encryption to across the network. Select WEP 64bits or WEP 128bits to limit communication to
only those devices that share the same WEP settings. Select WPA-PSK or WPA2-PSK to secure your network using a
password and dynamic key changes (No RADIUS server required).

D-Link DAP-1160 Specifications

General

Channels quantity	2 channels
Ethernet LAN data rates	100 Mbit/s
Maximum data transfer rate	54 Mbit/s
Internal	No
MAC address filtering	Yes