D-Link DAP-1160 User Manual

44D-Link DAP-1160 User Manual
Section 3 - Security
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please
establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption
due to the added overhead.
1. Log into the web-based conguration utility by opening a web browser and entering the IP address of the access point
(192.168.0.50). Click on Wireless Settings on
the left side.
2. Next to Security Mode, select Enable
WPA Wireless Security, E n a b l e
WPA2 Wireless Security, or En abl e
WPA2-Auto Wireless Security.
3. Next to Cipher Mode, select TKIP, AES, or
Auto.
4. Next to Personal / Enterprise, select
Enterprise.
5. Next to RADIUS Server enter the IP Address of
your RADIUS server.
6. Next to Port, enter the port you are using with your RADIUS server. 1812 is the default port.
7. Next to Shared Secret, enter the security key.
8. Click Save Settings to save your settings.
Congure WPA-EAP, WPA2-EAP, and WPA2-Auto-
EAP (Enterprise)

D-Link DAP-1160 Specifications

General

Channels quantity	2 channels
Ethernet LAN data rates	100 Mbit/s
Maximum data transfer rate	54 Mbit/s
Internal	No
MAC address filtering	Yes