D-Link DAP-1160 User Manual

45D-Link DAP-1160 User Manual
Section 4 - Connecting to a Wireless Network
Connect to a Wireless Network
Using Windows
®
XP
Windows
®
XP users can use the built-in wireless utility (Zero Conguration Utility) to connect to a wireless network.
The following instructions are for Service Pack 2 users. If you are using another company’s utility or Windows
®
2000,
please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities
will have a “site survey” option similar to the Windows
®
XP utility as shown below.
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select View Available
Wireless Networks.
If you receive the Wireless Networks Detected bubble, click
on the center of the bubble to access the utility.
or
The utility will display all available wireless networks in your
area. Click on a network (displayed using the SSID) and click
the Connect button.
If you get a good signal but cannot access the Internet,
check the TCP/IP settings for your wireless adapter. Refer
to the Networking Basics section in this manual for more
information.

D-Link DAP-1160 Specifications

General

Channels quantity	2 channels
Ethernet LAN data rates	100 Mbit/s
Maximum data transfer rate	54 Mbit/s
Internal	No
MAC address filtering	Yes