D-Link DES-3226S User Manual

DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
97
Radius Server Settings
Use this menu to configure the settings the Switch will use to communicate with a Radius server. To add Radius server settings
click the New button, a separate configuration menu appears. To edit an existing Radius settings index, select it and click the
edit button
Figure 6 - 79. Radius Server Settings
The parameters configured for adding and editing Radius settings are the same. See the table below for a description.
Figure 6 - 80. Radius Server – Add New Figure 6 - 81. Edit Radius Server Settings
Configure the following Radius server settings:
Parameter Description
Index
Radius server settings index.
IP Address
Type in the IP address of the Radius server.
Key
Type the shared-secret key used by the Radius server and the Switch. Up to 32
characters can be used.
AuthPortNumber
Type the UDP port number for authentication requests. The default is 1812.
AcctPortNumber
Type the UDP port number for accounting requests (if accounting server is being used).
The default is 1813.

D-Link DES-3226S Specifications

General

Brand	D-Link
Model	DES-3226S
Category	Switch
Language	English