DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
44
Restart System
Use the menu below to restart the Switch.
Click to check the Yes option if you want to save the current configuration to non-volatile RAM before restarting the Switch.
Click the No option if you do not want to save the current configuration before restarting the Switch. In this case, all of the
configuration information entered from the last time Save Changes was performed will be lost.
NOTE: Clicking the Yes option in the Restart menu is equivalent to executing Save Changes and
then restarting the Switch.
Click the Restart button to restart the Switch.
Figure 6 - 7. Restart System Screen
Basic Setup
The hyperlinked menus contained in the Basic Setup folder include:
• Switch Information
• Basic Switch Setup
• Stacking Information
• Port Configuration
• Port Security Settings
• Multicast Port Filtering Mode
• Traffic Segmentation Table
• User Accounts
• Management Station Ip Address
• Serial Port Settings
These menus are discussed below in this section with the exception of the User Accounts (see previous section on User
Accounts Management).
The menus within subfolders in the Basic Setup folder are presented in separate sections including
• SNTP SETTINGS
• NETWORK MANAGEMENT
• SWITCH UTILITIES
To Next Page
Loading...
Need help?
General