DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
110
Router Ports
This displays which of the Switch’s ports are currently configured as router ports. A router port configured by a user (using the
console or Web-based management interfaces) is displayed as a static router port, designated by S. A router port that is
dynamically configured by the Switch is designated by D.
To view the Router Port table, click on the Router Ports link:
Figure 6 - 98. Browse Router Port
S signifies a static router port, configured by the user.
D signifies a dynamically assigned router port, configured by the Switch.
IGMP Snooping Status
This allows the Switch’s IGMP Snooping table to be viewed. IGMP Snooping allows the Switch to read the Multicast Group
IP address and the corresponding MAC address from IGMP packets that pass through the Switch. The ports where the IGMP
packets were snooped are displayed, signified with an M. The number of IGMP reports that were snooped is also displayed in
the Reports field.
To view the IGMP Snooping table, click on the IGMP Snooping Status link:
Figure 6 - 99. IGMP Snooping Status
The following fields can be set or are displayed.
Parameter Description
Multicast Group
The IP address of the multicast group.
MAC Address
The MAC address of the multicast group.
Reports
The total number of reports received for this group.
To Next Page
Loading...
Need help?
General