D-Link DGS-1210-10P User Manual

5 Configuration D-Link Web Smart Switch User Manual
Function Tree
All configuration options on the switch are accessed through the Setup menu on the left side of the screen.
Click on the setup item that you want to configure. The following sections provide more detailed description
of each feature and function.
Figure 39 –Function Tree
Device Information
The Device Information provides an overview of the switch, including essential information such as firmware
& hardware information, and IP address.
It also offers an overall status of common software features:
RSTP: Click Setting to link to Configuration > Spanning Tree > STP Global Settings. Default is disabled.
Port Mirroring: Click Setting to link to Configuration > Port Mirroring. Default is disabled.
Storm Control: Click Setting to link to Configuration > QoS > Storm Control. Default is disabled.
Safeguard Engine: Click Setting to link to Configuration > Security > Safeguard Engine. Default is enabled.
IGMP Snooping: Click Setting to link to Configuration > IGMP Snooping. Default is disabled.
SNMP: Click Setting to link to System > SNMP Setting. Default is disabled.
802.1X: Click Setting to link to Configuration > Security > 802.1X > 802.1X Settings. Default is disabled.
802.1Q Management VLAN: Click Setting to link to Configuration > 802.1Q Management VLAN. Default is
disabled.
DHCP Client: Click Setting to link to System > System Setting. Default is disabled.
2
2
5
5

D-Link DGS-1210-10P Specifications

General

Number of queues	4
MAC address table	8000 entries
Store-and-forward	Yes
Packet buffer memory	0.5 MB
Maximum data transfer rate	1 Gbit/s
Supported data transfer rates	10/100/1000 Mbps
10G support	No
Networking standards	IEEE 802.2, IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Networking features	Gigabit Ethernet
Packet transfer speed	14.88
Connectivity technology	Wired
Ethernet interface type	Fast Ethernet, Gigabit Ethernet
DHCP features	DHCP server, DHCP client
Security algorithms	802.1x RADIUS
Switch type	-
Switch layer	L2
Fiber optic connector	SFP
SFP/SFP+ slots quantity	2
Basic switching RJ-45 Ethernet ports quantity	10
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	109.6 W
Safety	cUL, LVD
Certification	FCC, CE, IC, VCCI, C-Tick
Product color	Black
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	180 mm
Width	330 mm
Height	44 mm
Weight	1840 g