D-Link DGS-1210-10P User Manual

Appendix B - Technical Specifications D-Link Web Smart Switch User Manual
Appendix B - Technical Specifications
Hardware Specifications
Key Components / Performance
Switching Capacity:
- DGS-1210-10P: 20Gbps
Max. Forwarding Rate
- DGS-1210-10P: 14.88Mpps
Forwarding Mode: Store and Forward
Packet Buffer memory:
- DGS-1210-10P: 512K Bytes
DDRII for CPU: 64M Bytes
Flash Memory: 16M Bytes
Port Functions
10 1000Base-T ports compliant with the
following standards:
- IEEE 802.3
- IEEE 802.3u
- Supports Full-Duplex operations
2 combo SFP ports compliant with the
following standards:
- IEEE 802.3z
- Supports Full-Duplex operations
SFP transceivers supported
- DEM-310GT (1000BASE-LX, 10km)
- DEM-311GT (1000BASE-SX, 550m)
- DEM-314GT (1000BASE-LH, 50km)
- DEM-315GT (1000BASE-ZX, 80km)
- DEM-312GT2 (1000BASE-SX, 2km)
- DEM-210 (100BASE-FX, 15km)
- DEM-211 (100BASE-FX, 2km)
WDM Transceivers Supported:
- DEM-330T (1000Base-BX,TX-1550/RX-
1310nm, 10km)
- DEM-330R (1000Base-BX,TX-1310/RX-
1550nm, 10km)
- DEM-331T (1000Base-BX,TX-1550/RX-
1310nm, 40km)
- DEM-331R (1000Base-BX,TX-1310/RX-
1550nm, 40km)
- DEM-220T (100Base-BX, TX-1550/RX-
1310nm, 20km)
- DEM-220R (100Base-BX, TX-1310/RX-
1550nm, 20km)
Physical & Environment
AC input, 100~240 VAC, 50/60Hz,
internal universal power supply
Acoustic Value:
- DGS-1210-10P: 0dB (Fan-less)
Operation Temperature 0~40°C
Storage Temperature -10~70°C
Operation Humidity: 10%~95% RH
Storage Humidity: 5%~95% RH
Emission (EMI) Certifications
FCC class A
CE Class A
VCCI Class A
Safety Certifications
cUL, LVD
Features
L2 Features
Supports up to 8K MAC address
Jumbo frame: Supports up to 10,000
bytes
IGMP snooping: Supports 256 multicast
group
802.1D Spanning Tree
802.1w Rapid Spanning Tree
Loopback Detection
802.3ad Link Aggregation: up to 8 groups
per device, up to 8 ports per group
Port mirroring
PoE Features
PoE standard: Supports 802.3af and pre-
standard of 802.3at
PoE Capable Ports: All ports are selective
at 15.4W or 30W per port, total 4 ports at
15.4W per port or 8 ports at 7.8W per port
Power feeding for PoE: Port 1~8: Per port
ÆMax is 30W, and the default is 15.4W
PoE power budget: Output capacity for
DGS-1210-10P: 78W
D-Link Green Technology
Power Saving: Enabled by default, save
energy in 2 ways:
- Sleep Mode: Drastically save power when
the switch port link is down. For example, no
PC connection or the connected PC is
powered off.
- Cable Length Detection: Detects the length
of connected RJ-45 cables and adjusts
power usage accordingly without affecting
performance. Once the RJ-45 connection is
less than 20m, the switch will reduce the
power instead of full power, which is only
needed for 100m cables.
62

D-Link DGS-1210-10P Specifications

General

Number of queues	4
MAC address table	8000 entries
Store-and-forward	Yes
Packet buffer memory	0.5 MB
Maximum data transfer rate	1 Gbit/s
Supported data transfer rates	10/100/1000 Mbps
10G support	No
Networking standards	IEEE 802.2, IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Networking features	Gigabit Ethernet
Packet transfer speed	14.88
Connectivity technology	Wired
Ethernet interface type	Fast Ethernet, Gigabit Ethernet
DHCP features	DHCP server, DHCP client
Security algorithms	802.1x RADIUS
Switch type	-
Switch layer	L2
Fiber optic connector	SFP
SFP/SFP+ slots quantity	2
Basic switching RJ-45 Ethernet ports quantity	10
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	109.6 W
Safety	cUL, LVD
Certification	FCC, CE, IC, VCCI, C-Tick
Product color	Black
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	180 mm
Width	330 mm
Height	44 mm
Weight	1840 g