D-Link DGS-1510-20 User Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide
44
LED Indicators
Per Switch
LED Indicator Color Status Description
Power Green
Solid light Power on
Blinking Performing System Self-test
Light off Power off
Console Green
Solid light Console on
Light off Console off
Fan Green
Solid light Diagnostics passed and in normal operation
Red
Solid light Fan failure
Stack ID Green
Capable 1-6,
H, h, E, G
One of the following will be displayed:
• 1-6: Indicates the Unit ID of the Switch
• H: Indicates the Switch is the Primary Master
• h: Indicates the Switch is the Backup Master
• E: As error occurred during System Self-test
• G: The Safeguard Engine is entering the
exhausted mode
The Stack ID (Unit ID) is assigned either by the user
(static mode) or by the system (automatic mode).
When the Switch is assigned as the primary or
backup master in the stack, the Stack ID will toggle
between the letters 'H' or 'h' and the Unit ID.
Port LED Mode
Indicator
(DGS-1510-28P,
DGS-1510-
28XMP, and
DGS-1510-
52XMP Only)
An LED Mode Select Button to switch two modes in turn for all 10/100/1000Mbps
ports:
• Link/Act/Speed Mode
• PoE Mode
Green
Solid light An LED Mode Select Button to switch
Link/Act/Speed Mode
Solid light An LED Mode Select Button to switch PoE Mode
Per RJ45 Port
LED Indicator Color Status Description
Link/Act/Speed
Mode
Green
Solid light When there is a secure connection (or link) to
1000Mbps Ethernet device at any of the ports
Blinking When there is reception or transmission of data
occurring at 1000Mbps
Orange
Solid light When there is a secure connection (or link) to
10/100Mbps Ethernet device at any of the ports
Blinking When there is reception or transmission of data
occurring at 10/100Mbps
Off
Light off No link
PoE Mode
(DGS-1510-28P,
Green
Solid light Power feeding
Orange
Solid light Error condition

D-Link DGS-1510-20 Specifications

General

Brand	D-Link
Model	DGS-1510-20
Category	Switch
Language	English