D-Link DIR-608 User Manual

8D-Link DIR-608 User Manual
Section 1 - Product Overview
Router Mode
In Router Mode, the DIR-608 Wireless N 150 Home Router operates as the central device of your network. This is the most
common type of installation and is the factory default setting suitable for most users. The DIR-608 connects to your cable
modem, DSL modem, or other Internet source and shares your Internet connection with your wired and wireless devices.
Create a Home Network (Router Mode)
Use this mode for:
• Setting up a network for the rst time.
• Replacing an existing router or network equipment.
• Adding a router to share a broadband connection which was previously connected to a single computer.
Place your DIR-608 near your broadband Internet connection device (e.g. DSL/Cable Modem) and connect to it via Ethernet
cable.
To use your DIR-608 as a Router, refer to Hardware Setup - Router on page 13.
Wired and Wireless DevicesBroadband
Connection Device
(e.g. DSL/Cable Modem)
Internet DIR-608

D-Link DIR-608 Specifications

General

Brand	D-Link
Model	DIR-608
Category	Network Router
Language	English