D-Link DIR-608 - Time and Date

80D-Link DIR-608 User Manual
Section 3 - Conguration
Time and Date
This page allows you to edit the system time and Network Time Protocol (NTP). You can
congure, update, and maintain the correct time on the system clock, and congure Daylight
Saving.
System Time Conguration
Time and Date
DIR-608
Maintenance
Status
Start NTP:
NTP Start:
Get GMT Time
Start NTP:
NTP Start: To update the current time using NTP, click the Get GMT Time button.
Apply Changes Reset
Apply Changes Reset
NTP Conguration:
State:
Disable Enable
Server:
ntp1.dlink.com
Server2:
Interval: Every 1 hours
Time Zone:
(GMT+08:00) China, Hong Kong, Taipei
▼
GMT time: Tue July 5 16:09:10 2016
System Time
System Time:
2016 Year Jul
▼
Month 5 Day
16 Hour 09 min 16 sec
Daylight Saving Offset:
0:00
▼
System Time
System Time: Enter the correct year, month, day, and time.
Daylight Saving
Offset:
Select the daylight saving oset if Daylight Saving time will be used.
Click the Apply Changes button to save any changes made.
NTP Configuration:
State: Choose to enable or disable the NTP client.
Server: Enter the address of the NTP server to connect to.
Server2: Enter the address of a second NTP server to connect to.
Interval: Enter the time period that you want the NTP server to synchronize
time with the devices on the network. The default value is one hour.
Time Zone: Select the time zone you are in from the dropdown menu.
GMT Time: This shows the current GMT (Greenwich Mean Time) time.
Click the Apply Changes button to save any changes made.