D-Link DIR-608 - Advanced Wireless

55D-Link DIR-608 User Manual
Section 3 - Conguration
Advanced Wireless
Advanced Wireless Settings
Select a wireless security encryption option. You can also choose to not use one by selecting
None, but this is not recommended.
Enable Wireless: Enable wireless on your network.
Fragment
Threshold (256-
2346):
The fragmentation threshold, which is specied in bytes, determines
whether packets will be fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission. 2346 is the default
setting.
RTS Threshold (1-
2347):
This value should remain at its default setting of 2346. If inconsistent
data ow is a problem, only a minor modication should be made.
Preamble Type: Use the dropdown menu to specify whether the Router should
use the Short Preamble or Long Preamble type. The preamble type
denes the length of the CRC (Cyclic Redundancy Check) block for
communication between the router and roaming wireless adapters.
Radio Power: Set the transmit power of the antennas in percentage.
HT20/40
Coexistence:
Enable or disable HT20/40 Coexistence.
Advanced Wireless Settings
Enable Wireless :
☑
Fragment Threshold
(256-2346) :
2346
RTS Threshold (1-2347:
2347
Preamble Type :
Short Preamble
▼
Radio Power (Percent) : 100%
▼
HT20/40 Coexistence :
Enable Disable
Wireless Advanced Settings
Advanced Wireless
DIR-608
Wireless
Advanced
Click Advanced Wireless on the navigation menu to configure advanced operation
characteristics of your wireless LAN. These settings are provided for advanced users.