23D-Link DIR-803 User Manual
Section 3 - Conguration
Select Dynamic IP (DHCP) to obtain IP Address information
automatically from your ISP. This option is commonly used for
cable modem services.
The Host Name is optional but may be required by some ISPs.
Leave blank if you are not sure.
Check the box if you are having problems obtaining an IP address
from your ISP.
Enter the Primary and Secondary DNS Server IP addresses
assigned by your ISP. These addresses are usually obtained
automatically from your ISP. Leave blank if you did not specically
receive these from your ISP.
Maximum Transmission Unit - you may need to change the MTU
for optimal performance with your specic ISP. 1500 is the default
MTU.
The default MAC Address is set to the Internet port’s physical
interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address unless
required by your ISP. You can use the Clone Your PC’s MAC
Address button to replace the Internet port’s MAC address with
the MAC address of your Ethernet card.
My Internet
Connection is:
Host Name:
Use Unicasting:
Primary/Secondary
DNS Servers:
MTU:
MAC Address:
Internet Setup
Dynamic (Cable)
To Next Page
Loading...
Need help?
General
