85D-Link DIR-803 User Manual
Section 3 - Conguration
Admin
This page will allow you to change the Administrator password and also enable Remote Management.
Tools
Enter a new Password for the Administrator login. Enter again to verify.
Check to enable a challenge-response test that requires users to type letters
or numbers from a distorted image displayed on the screen. This helps
prevent online hackers and unauthorized users from gaining access to your
router’s network settings.
Check to enable HTTPS to connect to the router securely. This means to
connect to the router, you must enter https://192.168.0.1 (for example)
instead of http://192.168.0.1.
Remote management allows the DIR-803 to be congured from the Internet
by a web browser. A username/password is still required to access the Web
Management interface.
The port number used to access the DIR-803 is used in the URL. Example:
http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-803
and 8080 is the port used for the Web Management interface.
If you have enabled HTTPS Server, you must enter https:// as part of the
URL to access the router remotely.
Select Allow All or Deny All from the drop-down menu.
This eld will display the current remote admin lter.
Click Save Settings.
Password:
Enable Graphical
Authentication:
Enable HTTPS
Server:
Enable Remote
Management:
Remote Admin Port:
Remote Admin
Inbound Filter:
Details:
To Next Page
Loading...
Need help?
General
