D-Link DIR-803 User Manual

89D-Link DIR-803 User Manual
Section 3 - Conguration
Use this option to save the current router
conguration settings to a le on the hard disk of
the computer you are using. First, click the Save
Conguration button. A le dialog will appear,
allowing you to select a location and le name for
the settings.
Use this option to load previously saved router
conguration settings. First, click the Browse button
to locate a previously saved le of conguration
settings. Then, click the Restore Conguration
from File button to transfer those settings to the
router.
This option will restore all conguration settings
back to the settings that were in effect at the
time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router conguration
settings, use the Save Conguration button above.
Click Reboot the Device to reboot the router.
Click on Clear to delete the Language Pack. Refer
to ”Firmware” on page 90 for Language Pack
upgrade instructions.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to
Factory Default
Settings:
Reboot the
Device:
Clear Language
Pack:
System
This section allows you to save the router’s conguration settings, reboot the router, and restore the router to the factory
default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created.

D-Link DIR-803 Specifications

General

Brand	D-Link
Model	DIR-803
Category	Wireless Router
Language	English