D-Link DIR-825 User Manual

DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Samba
On the USB Storage / Samba page, you can enable the built-in Samba server of the router to
provide access to the USB storage for users of your LAN.
Figure 118. The USB Storage / Samba page.
To enable the Samba server, move the Enable Samba server switch to the right.
The Anonymous login switch (by default, the switch is moved to the right) allows anonymous
access to the content of the USB storage for users of your LAN.
If you want to provide authorized access to the content of the USB storage for users of your LAN,
move the switch to the left. After applying the parameters on this page, go to the USB Storage /
USB Users page and create needed accounts.
In the Work group field, leave the value specified by default (WORKGROUP) or specify a new
name of a workgroup which participants will have access to the content of the USB storage.
In the Short description field, you can specify an additional description for the USB storage.
This value will be displayed in some operating systems. Use digits and/or Latin characters.
In the NetBIOS field, specify a name of the USB storage which will be displayed for users of your
LAN. Use digits and/or Latin characters.
Page 158 of 249

D-Link DIR-825 Specifications

Ports & Interfaces

gigabit LAN ports	4
gigabit WAN port	1
USB port	1

Weight and Dimensions

item dimensions	4.6” x 7.6” x 1.2”
packaging dimensions	9.6” x 11.1” x 3.1”
item weight	0.7 lbs
packaging weight	2.0 lbs