58D-Link M15 User Manual
Section 3 - Conguration
Firewall
Enable DMZ Enable or disable Demilitarized Zone (DMZ). This completely exposes
the client to threats over the Internet. This is not recommended unless
they are servers that must be exposed to the WAN.
DMZ IP Address If you enabled DMZ, enter the IP address of the client you wish to
expose, or use the drop-down menu to quickly select it.
Enable SPI IPv4
Enabling Stateful Packet Inspection (SPI) or dynamic packet ltering
helps prevent cyber attacks by tracking more states per session to
validate that the trac passing through the session conforms to the
protocol.
Enable Anti-
Spoof Checking
Enable this feature to help protect your network from certain kinds
of “spoong” attacks.
IPv6 Simple
Security
Enable or disable IPv6 simple security. A simple rewall conguration
that denies access directly to computers behind the router.
IPv6 Ingress
Filtering
Enable or disable IPv6 ingress filtering for incoming packets to
prevent suspicious senders.
Click Save when you are done.
Go to Features > Firewall to congure the rewall settings. The rewall
feature helps protect your network from malicious attacks over the Internet.
To congure the IPv4/IPv6 rewall rules, click the IPv4 Rules tab. Refer to
IPv4/IPv6 Rules on page 60.
To Next Page
Loading...
Need help?
General
