D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
491
44-2 show ipmc cache
Description
This command is used to display the IP multicast forwarding cache.
Format
show ipmc cache {group <group>} {ipaddress <network_address>}
Parameters
group - (Optional) Specify the multicast group.
<group> - Enter the multicast group value here.
ipaddress - (Optional) Specify the network address used here.
<network_address> - Enter the network address used here.
Restrictions
None.
Example
To display the IP multicast forwarding cache:
DGS-3120-24TC:admin#show ipmc cache
Command: show ipmc cache
IP Multicast Forwarding Table
Multicast Source Upstream Expire Routing
Group Address/Netmask Neighbor Time Protocol
--------------- ---------------------- --------------- ------ ---------
224.1.1.1 10.48.74.121/8 10.48.75.63 30 DVMRP
224.1.1.1 20.48.74.25/8 20.48.75.25 20 PIM-DM
224.1.2.3 10.48.75.3/8 10.48.76.6 30 DVMRP
Total Entries: 3
DGS-3120-24TC:admin#

D-Link xStack DGS-3120 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3120 Series
Category	Switch
Language	English