To Next Page

To Previous Page

xStack

DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide

917

DGS-3120-24TC:admin# enable ssl

Command: enable ssl

Note: Web will be disabled if SSL is enabled.

Success.

DGS-3120-24TC:admin#

95-3 disable ssl

Description

This command is used to disable SSL feature and supported ciphercuites. Using “disable ssl”

command will disable SSL feature and for each ciphersuites status user must specified it by this

command.

Format

disable ssl {ciphersuite {RSA_with_RC4_128_MD5 | RSA_with_3DES_EDE_CBC_SHA |

DHE_DSS_with_3DES_EDE_CBC_SHA | RSA_EXPORT_with_RC4_40_MD5 |

RSA_with_RC4_128_SHA}}

Parameters

ciphersuite - (Optional) Specify the cipher suite combination used for this configuration.

RSA_with_RC4_128_MD5 – Specify to use the RSA key exchange with RC4, 128-bit,

encryption using the MD5 hash.

RSA_with_3DES_EDE_CBC_SHA – Specify to use the RSA key exchange with 3DES-EDE-

CBC encryption using the SHA hash.

DHE_DSS_with_3DES_EDE_CBC_SHA – Specify to use the DHE-DSS key exchange with

3DES-EDE-CBC encryption using the SHA hash.

RSA_EXPORT_with_RC4_40_MD5 – Specify to use the RSA-EXPORT key exchange with

RC4, 40-bit, encryption using the MD5 hash.

RSA_with_RC4_128_SHA - Specify to use the RSA key exchange with an RC4, 128-bit,

encryption using the SHA hash.

Restrictions

Only Administrator-level users can issue this command.

Example

To disable SSL ciphersuite for RSA_with_RC4_128_MD5:

DGS-3120-24TC:admin# disable ssl ciphersuite RSA_with_RC4_128_MD5

Command: disable ssl ciphersuite RSA_with_RC4_128_MD5

Success.

DGS-3120-24TC:admin#

To disable SSL:

D-Link xStack DGS-3120 Series User Manual

Other manuals for D-Link xStack DGS-3120 Series