D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
771
DGS-3120-24PC:admin#config poe ports 1-4 state enable priority critical
power_limit class_1
Command: config poe ports 1:1-1:4 state enable priority critical power_limit
class_1
Success.
DGS-3120-24PC:admin# config poe ports 5 state enable priority critical
power_lim
it user_define 1000
Command: config poe ports 1:5 state enable priority critical power_limit
user_define 1000
Success.
DGS-3120-24PC:admin#
77-3 show poe system
Description
This command is used to display the setting and actual values of the whole PoE system.
Format
show poe system {units <unitlist>}
Parameters
units - (Optional) Specified units that will be displayed.
<unitlist> - Enter the unit list that will be displayed here.
If no parameter specified, the system will display the status of all supported poe units in the
systems.
Restrictions
None.
Example
To display PoE system:

D-Link xStack DGS-3120 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3120 Series
Category	Switch
Language	English