D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
981
101-26 enable snmp traps
Description
This command is used to enable SNMP trap support.
Format
enable snmp traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable SNMP trap support:
DGS-3120-24TC:admin# enable snmp traps
Command: enable snmp traps
Success.
DGS-3120-24TC:admin#
101-27 disable snmp traps
Description
This command is used to disable SNMP trap support on the Switch.
Format
disable snmp traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To prevent SNMP traps from being sent from the Switch:

D-Link xStack DGS-3120 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3120 Series
Category	Switch
Language	English