D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
838
specified class.
<value 8-10240000> - Specify the packet limit, in Kbps, that the above ports will be allowed to
receive. If the specified rate is not multiple of minimum granularity, the rate will be
adjusted.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure the ports 1:1-1:10 CoS bandwidth queue 1 min rate to 130 and max rate to 100000:
DGS-3120-24TC:admin#config per_queue bandwidth_control ports 1:1-1:10 1
min_rate 130 max_rate 1000
Command: config per_queue bandwidth_control ports 1:1-1:10 1 min_rate 130
max_rate 1000
Granularity: TX: 8. Actual Rate: MIN: 128, MAX: 1000.
Success.
DGS-3120-24TC:admin#
84-4 show per_queue bandwidth_control
Description
This command is used to display per port CoS bandwidth control settings.
Format
show per_queue bandwidth_control {<portlist>}
Parameters
<portlist> - (Optional) Specify a range of ports to be displayed.
If no parameter is specified, system will display all ports CoS bandwidth configurations.
Restrictions
None.
Example
Display per port CoS bandwidth control table:

D-Link xStack DGS-3120 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3120 Series
Category	Switch
Language	English