113
3.12.4.3 Hotspare disks
From Main menu->Setting->Storage->RAID->Hotspare HDD, you can add the hotspare HDD. See Figure
3-120. The type includes two options:
Global: It is global hotspare disk. When any RAID becomes degrading, it can replace and build the
RAID.
Local: It is local hotspare disk. When the specified RAID becomes degrading, it can replace and build
the RAID.
Select a hot spare device and then click Delete button. Click Apply button to delete.
Figure 3-120
3.13 Basic Setups
Set NVR basic setup, device setup and other setups.
3.13.1 Device Setup
From Main menu->Setting->System->General->General, you can go to the general interface. See Figure
3-121.
Pack duration: Here is for you to specify record duration. The value ranges from 0 to 120 minutes.
Default value is 60 minutes.
Device ID: Please input a corresponding device name here.
Device No: When you are using one remote control (not included in the accessory bag) to control
several NVRs, you can give a name to each NVR for your management.
Language: System supports various languages: Chinese (simplified), Chinese (Traditional), English,
Italian, Japanese, French, Spanish (All languages listed here are optional. Slight difference maybe
found in various series.)
Video standard: There are two formats: NTSC and PAL.
HDD full: Here is for you to select working mode when hard disk is full. There are two options: stop
recording or rewrite. If current working HDD is overwritten or the current HDD is full while the next
To Next Page
Loading...
Need help?
General
