205
It refers to the on-off signal from the network
camera. It can activate the NVR local activation
operation.
System can generate an alarm when the network
camera and the NVR are disconnected.
Check the box here, system can automatically pops
up an alarm icon on the Alarm button in the main
interface when there is an alarm.
System sends out alarm sound when an alarm
occurs. You can specify as you wish.
Here you can specify alarm sound file.
4.12 Log out
Click log out button, system goes back to log in interface. See Figure 4-123.
You need to input user name and password to login again.
Figure 4-123
4.13 Un-install Web Control
You can use web un-install tool “uninstall web.bat” to un-install web control.
Please note, before you un-installation, please close all web pages, otherwise the un-installation
might result in error.
To Next Page
Loading...
Need help?
General
