137
icons at the left top corner of the channel number for you reference. M stands for main stream. S stands
for sub stream (extra stream).
4) If you login via the WAN mode, system does not support alarm activation to open the video function in
the Alarm setup interface.
Important
For multiple-channel monitor mode, system adopts extra stream to monitor by default. You can not
modify manually. All channels are trying to synchronize. Please note the synchronization effect still
depends on your network environments.
For bandwidth consideration, system can not support monitor and playback at the same time.
System auto closes monitor or playback interface when you are searching setup in the configuration
interface. It is to enhance search speed.
4.8 Setup
4.8.1 Camera
4.8.1.1 Remote Device
4.8.1.1.1 Remote Device
From main window->Setup->Camera->Remote device->Remote device, you can see remote device
interface is shown as below. See Figure 4-17.
Figure 4-17
To Next Page
Loading...
Need help?
General
