7
Administrator and password set on this interface are used to log in to the web management
platform.
The administrator password can be reset through the email address you entered if the
administrator forgets the administrator password.
The password should consist of 8 to 32 non-blank characters and contain at least two
types of characters among upper case, lower case, number, and special character
(excluding ' " ; : &).
After the initialization is completed, the standby interface is displayed.
Standby interface Figure 3-2
Standby Interface 3.3
You can unlock the door through fingerprint, passwords, and card. For details, see Table 3-2.
If there are no operations in 30 seconds, the standalone will go to screensaver mode when
the screensaver is enabled and pictures have been imported for screensaver play; After 30
seconds screensaver play, the standalone go to the standby mode.
The following figures are for reference only, and the actual interface shall prevail.
To Next Page
Loading...
Need help?
General
