Dahua Access Standalone User Manual

62
First card unlock information Figure 6-18
Click . Step 5
The icon changing into indicates First Card Unlock is enabled.
6.2.5 Multi-Card Unlock
In this mode, multiple groups of users have to swipe cards for an access control channel in an
established sequence to unlock the door.
 One group can have up to 50 users.
 With Multi-Card Unlock enabled for an access control channel, it supports up to four
groups of users being on site at the same time for verification. The total number of users
can be 64 at most, with up to five valid users.
On the Access Control interface, click . Step 1
The Advanced Function interface is displayed.
Click the Multi-Card Unlock tab. Step 2
The Multi-Card Unlock interface is displayed.
Add user group. Step 3
1) Click Person Group.

Dahua Access Standalone Specifications

General

Brand	Dahua
Model	Access Standalone
Category	IP Access Controllers
Language	English