Dahua Access Standalone User Manual

19
3.9.4 Privacy Setting
Privacy setting Figure 3-12
Table 3-6 Features
Parameter Description
PWD Reset
Enable
If the PWD Reset Enable function is enabled, you can reset the password.
The PWD Reset function is enabled by default.
HTTPS
Hypertext Transfer Protocol Secure (HTTPS) is a protocol for secure
communication over a computer network.
When HTTPS is enabled, HTTPS will be used to access CGI commands;
otherwise HTTP will be used.
CGI
Common Gateway Interface (CGI) offers a standard protocol for web
servers to execute programs that execute like console applications running
on a server that generates web pages dynamically.
When CGI is enabled, CGI commands can be used. The CGI is enabled by
default.
SSH
Secure Shell (SSH) is a cryptographic network protocol for operating
network services securely over an unsecured network.
When SSH is enabled, SSH provides cryptographic service for the data
transmission.
When HTTPS is enabled, the standalone will restart automatically.
3.9.5 Card No. Reverse
If the third party card reader needs to be connected to the terminal through the Wiegand output
port, you need to enable the Card No. Reverse function; otherwise the communication between
the terminal and the third party card reader might fail due to protocol discrepancy.

Dahua Access Standalone Specifications

General

Brand	Dahua
Model	Access Standalone
Category	IP Access Controllers
Language	English