28
Please use the security code within 24 hours after you receive it. Otherwise, it will
become invalid.
If wrong security codes are entered for consecutive five times, the administrator
will be frozen for five minutes.
Enter the security code you have received. Step 4
Click Next. Step 5
The Reset Password interface is displayed.
Reset and confirm the new password. Step 6
The password should consist of 8 to 32 non-blank characters and contain at least two
types of characters among upper case, lower case, number, and special character
(excluding ' " ; : &).
Click OK, and the reset is completed. Step 7
Door Parameter 4.4
Set the door parameters including name, state, opening method, hole time, normally open time,
normally close time, timeout, and enable the alarms that might be triggered during unlocking
the door.
Click Door Parameter. Step 1
Door parameter Figure 4-7
Set the door parameters Step 2
Table 4-1 Door parameter description
Parameter Description
Name Enter a door name.
State
There are three options: Normal, NC, and NO.
Normal: If Normal
is selected, the door will be unlocked and
locked depending on your settings.
NC: If NC
is selected, the door status is normally closed, which
means the door will not be unlocked.
NO: If NO is selected, the door status is normally open, which
means the door will never be closed.
To Next Page
Loading...
Need help?
General
