Dahua Access Standalone User Manual

32
4.6.1 Time Section
After setting the period, users can only unlock the door in the periods that you have set.
Select Time Section > Time Section. Step 1
Time section Figure 4-12
Click Add. Step 2
Add period Figure 4-13
Set the period number and time section name. Select the Enable check box, and the Step 3
time section as needed.
You can configure 128 periods (weeks) whose number range is 0–127, and set four
periods on each day of a period (week). The default is 255, which indicates that the
period is not configured; 0–127 is the period configured manually. You can edit the
configured period in the User List on the standalone.

Dahua Access Standalone Specifications

General

Brand	Dahua
Model	Access Standalone
Category	IP Access Controllers
Language	English