Dahua Access Standalone User Manual

14
3.7.3 Lock Holding Time
Lock Holding Time is the duration in which the door is unlocked. If the door has been unlocked
for a period that exceeds the duration, the door will be automatically locked.
3.7.4 Door Sensor Type
There are two door sensor types: NO and NC.
3.7.5 Remote Verification
Tap Remote Verification to set the effective time, and then tap to enable it. Remote
verification is required when unlock doors. To unlock the door, a door unlock instruction sent by
the management platform is needed.
 means enabled.
 means not enabled.
Network Communication 3.8
To make the standalone work normally, you need to configure parameters for network, serial
ports and Wiegand ports.
3.8.1 IP Address
3.8.1.1 IP Configuration
Configure an IP address for the standalone to make it be connected to the network. For details,
see Table 3-4.

Dahua Access Standalone Specifications

General

Brand	Dahua
Model	Access Standalone
Category	IP Access Controllers
Language	English