Dahua L Series User Manual

203
The interface is shown as in Figure 4-88.
Click Set button and then input preset number.
Click Set button to save current preset.
Figure 4-88
Tour Setup
In Figure 4-87, click tour button.
Input tour value and preset No. Click Add preset button to add current preset to the tour. See Figure 4-89.
Tips
Repeat the above steps to add more presets to the tour. Click Del preset button to remove it from the tour.
Please note some protocols do not support delete preset function.
Figure 4-89
Pattern Setup
In Figure 4-87, click Pattern button and input pattern number.
Click Begin button to start direction operation. Or you can go back to Figure 4-84 to operate
zoom/focus/iris/direction operation.
In Figure 4-87, click End button.

Dahua L Series Specifications

General

Brand	Dahua
Model	L Series
Category	Network Hardware
Language	English