356
5.10.2.2 Connection
The connection interface is shown as in Figure 5-33.
Figure 5-33
Please refer to the following sheet for detailed information.
The max client login amount (such as WEB, platform, cellphone
and etc). The value ranges from 1 to 128(default).
The default value is 37777. You can input the actual port
number if necessary.
The default value is 37778. You can input the actual port
number if necessary.
The default value is 80. You can input the actual port number if
necessary.
The default value is 443. You can input the actual port number if
necessary.
The default value is 554.
5.10.2.3 WIFI AP
Please note this function is for some series only.
5.10.2.3.1 General Setup
The WIFI AP interface is shown as in Figure 5-34. Here you can set WIFI hotspot, so that the network
camera can use the hotspot to connect to the network.
To Next Page
Loading...
Need help?
General
