To Next Page

To Previous Page

UL Marking

See the type designation label for the valid markings of your

drive.

The UL mark is attached to the drive to verify that it meets UL

requirements.

UL Checklist

Ambient Conditions – The drives are to be used in a heated

indoor controlled environment. See section Ambient conditions

on page 106 for specic limits.

Input Cable Fuses – For installation in the United States,

branch circuit protection must be provided in accordance with

the National Electrical Code (NEC) and any applicable local

codes. To full this requirement, use the UL classied fuses

given in section Power cable sizes and fuses on page 104.

For installation in Canada, branch circuit protection must be

provided in accordance with Canadian Electrical Code and

any applicable provincial codes. To full this requirement, use

the UL classied fuses given in section Power cable sizes and

fuses on page 104.

Overload Protection – The drive provides overload protection

in accordance with the National Electrical Code (US).

NOTE: Input power connection, disconnecting device, power

cable selection and connection are all done at the

factory.

TeCHnICal daTa

Daikin ACS320 User Manual

Questions and Answers: